Table of Contents
Introduction
Flush door is a type of door design that have plain facings on both sides, making them a popular choice for both interior and exterior use. They are often used in spaces where space is limited, such as closets, pantries, and utility rooms, as well as for exterior doors in homes and other buildings.
Types
There are three types of flush doors: solid core, hollow core, and cellular core. Solid core flush doors are made of a solid core, usually made of low density particle board or foam, and can be supplemented with a type of laminate or plywood on each side. They are heavy and have good strength, making them a suitable option for exterior doors as they provide more insulation and strength.
Hollow core flush doors are hollow on the inside with a holding system, such as a honeycomb support system. They are lightweight but not as strong as solid core flush doors. The framing of stiles, top, bottom, and intermediate rails must be greater than 7.5 cm in width. The frame includes stiles along with top, intermediate & bottom rails, and installing wooden battens on the rails for filling openings between stiles and rails.
Cellular core flush doors are built by attaching plywood battens and they are more than 25 mm wide. The shutter is prepared by attaching plywood sheets and face veneers on both the faces of the core under pressure. These doors are chemically treated well and vacuum pressed, thus they own heat and water withstand features.
Advantages
Flush doors have many advantages, including their simple design, which makes them inexpensive and easy to find. They are also stiff, strong, and durable, making them a suitable choice for high-traffic areas. Additionally, flush doors can be recessed for use on tracks, such as in a closet, making them a versatile option for different types of spaces.
FAQS
Q: Can flush doors help with soundproofing?
A: Flush doors can assist in reducing outside noise by virtue of their solid and tight-fitting design. However, other steps such as sealing gaps and adding insulation may also be necessary for maximum soundproofing.
Q: How do flush doors contribute to energy efficiency?
A: Flush doors can improve energy efficiency by minimizing drafts and maintaining consistent indoor temperature due to their tight-fitting design that helps prevent outside air from entering the home.