In this blog post, I will discuss slip, trip, and fall hazards. Slip, trip, and fall are the most common hazards. These hazards are most commonly found in construction, maintenance, and oil-gas industries.
Here are some common slip, trip, and fall hazards.
- Glass floor surfaces that are inherently slippery (eg polished marble).
- Floor contamination from slippery contaminants (eg oil or leaves).
- Frost and ice (eg freezer floor or winter pavement).
- It is not flat and does not lose the floor surface. Broken razor. educational cable.
In particular, a person’s shoes can make a huge difference in how dangerous sleeping on the floor is.
Table of Contents
Reason Behind Fall
As per official data, approx 70% of fall happens on the same trip and slip level. The remaining 30% of fall are due to work at heights. This article summarizes information about slip, trip, and fall.
Slip:
Slipping occurs when there is too little grip or friction between the surface and the footwear. Below are the reasons for the slip.
- Loose mats or rugs. weather hazard.
- Sometimes it pours liquids.
- Oily or damp surfaces.
- Floors or other walking surfaces with additional grips in all areas.
- Pine needles or wet leaves.
Trip:
When the foot hits or bumps into an object, it trips over, causing the worker to lose balance and eventually fall. Common reasons for travel: