Urgent requirement with Aramco EPC Project in Al Khobar – Saudi Arabia.
The candidates must have at least a 10 years of experience in the same discipline with preferably KSA transferable visa. The detailed job description is mentioned below.
The candidate matching the below criteria only need to apply to this email ID and also mention the subject as Ref – Aramco EPC Project requirement Al Khobar – Saudi Arabia.
Category 1 : Electrical Engineer
Overview / Responsibilities : Looking for Electrical Engineer to work in engineering department in EPC projects (with experience in Saudi Aramco, OMPP projects).
- Working as Electrical Engineer responsible for preparing / reviewing Electrical Detailed Engineering Package as per project scope of work.
- Generation of project deliverable documents, including production, checking and approval as required to meet stated project requirements.
- Verification of preliminary design provided by Aramco, Sabic, Sadara, etc.
- Conducting site visit and collect all required information.
- Preparation of Load List.
- Cable Sizing, Transformer Sizing, UPS Sizing, Lighting Calculation, Battery & Battery Charger Sizing Calculation.
- Preparation of MTOs.
- Preparation of MRs & TBEs.
- Review and approved NMRs.
- Preparation of Cable & Conduit Schedule and Panel Schedule.
- Preparation of Data Sheets.
- Preparation of Lighting, Power, Grounding Layout.
- Participate in design review meetings as per project requirements and incorporate client comments on the submitted deliverables.
- Follow up Electrical construction work on project sites to ensure correct interpretation of IFC package.
- Resolve of all technical issues during construction/ commissioning and ensure that all the works done on site are in accordance with the issued for construction (IFC) drawings, contract documents and project specifications.
- Suggest ways to improve efficiency, costs and service in the execution of projects.
- Supporting estimation, procurement and construction departments as required.
- Preparation of redline drawings and As-built packages.
- Informs Project Management Team of any change in scope.
- Prepare design change notification (DCN) report for additional scope of work and take approval from Client.
- Perform such duties as may reasonably be assigned by the Engineering Manager.
Skills / Qualifications
- Experience with approved Engineering Contractor in KSA / GES+ is required.
- Experience with Saudi Aramco, OMPP projects is required.
- Bachelor’s degree in Electrical engineering or similar.
- Proven track record in FEED/Detailed Design experience.
- Experience with Saudi Aramco/Sabic/Sadara is required.
- Proficiency in Microsoft Excel, Word, Outlook and PowerPoint is required.
- Ability to deliver documentation that is technically correct to the required standard and schedule.
- Experience with approved software tools by client is required.
Category 2 : Piping/Pipeline Engineer (Mechanical Engineering or Similar )
Overview / Responsibilities – Looking for Piping/Pipeline Engineer to work in engineering department in EPC projects (with experience in Saudi Aramco, OMPP projects).
- Generation of piping / pipeline deliverables, including production, checking and approval as required to meet stated project requirements such as (Design Basis, Engineering Calculations, , LUP (Land Used Permission), Line Designation Table, Tie-in Index, Pipe Material Specification, Piping / Pipeline Data Sheets (Valves, Specialty Items…etc.), Safety Instruction Sheets, Material Requisitions, TBE/TBC, Hydrostatic Test Calculation and Hydrostatic Test Diagram, Hot Tap Calculation, Pipe Support Detail Drawings, Material Take-off, NMR (601,602 and 603), 3D model, Piping Plans/ Isometrics, Pipeline Routing Study, Alignment Sheet Drawing, Plan & Profile Drawing, Stress Analysis Report, FEED verification report).
- Familiar with the Saudi Aramco Standards, relevant International Standards, especially with API 6A, ASME B31.3, B31.4 & ASME B31.8.
- Verification of preliminary design provided by Aramco, Sabic, Sadara, etc.
- Conducting site visit and collect all required information.
- Interact with the Clients, Project Management and other Disciplines to achieve the design objectives
- preparation of Safety Instruction Sheet (SIS), wall thickness calculation, Hydrostatic Test Diagrams, Drawing mark-up, Construction Scope of Work, Painting Specification and BOM / Material Take-off’s as per Saudi Aramco Engineering Specifications as well as International Standards such as ASME, API & NACE requirement.
- Develop and check P&ID / PFD, Plot Plan, Piping layout, Piping Supports layout and isometric drawings.
- Prepare Project Proposal Narratives, Construction Scope of Work and Cut-Over Plans.
- Preparation of inter discipline piping information drawings such as Structural Loading Information, Miscellaneous Support Information, Local Supports and Foundations, Equipment Platform and Nozzle Orientations.
- Experience in conceptual layout, detailed piping design, special pipe support design, 3D modeling, checking of MTO generated from 3D modeling.
- Preparation of MTOs.
- Preparation of MRs & TBEs.
- Review and approved NMRs.
- Participate in design review meetings as per project requirements and incorporate client comments on the submitted deliverables.
- Follow up Piping/Pipeline construction work on project sites to ensure correct interpretation of IFC package.
- Resolve of all technical issues during construction/ commissioning and ensure that all the works done on site are in accordance with the issued for construction (IFC) drawings, contract documents and project specifications.
- Suggest ways to improve efficiency, costs and service in the execution of projects.
- Supporting estimation, procurement and construction departments as required.
- Preparation of redline drawings and As-built packages.
- Informs Project Management Team of any change in scope.
- Prepare design change notification (DCN) report for additional scope of work and take approval from Client.
- Perform such duties as may reasonably be assigned by the Engineering Manager.
Skills / Qualifications
- Experience with approved Engineering Contractor in KSA / GES+ is required.
- Experience with Saudi Aramco, OMPP projects is required.
- Bachelor’s degree in Mechanical engineering or similar.
- Proven track record in FEED/Detailed Design experience.
- Previous experience with Saudi Aramco/Sabic/Sadara is required.
- Proficiency in Microsoft Excel, Word, Outlook and PowerPoint is required.
- Experience in the use of pipeline design software (AutoCAD, MicroStation, Google Earth Pro Maps, CAESAR II) is advantageous.
How To Apply:
Email ID for sending the resume :
nidhin.panicker@gbs-saudi.com