In this article I will be discussing how to patch holes in drywall. Drilling holes in drywall is an important skill for any homeowner. Whether it’s a small nail hole or a large hole from an accident or damage, repairing drywall can be a simple and cost-effective solution. With the right tools and techniques, anyone can drill a hole in drywall and achieve a smooth and seamless finish.
Equipments For Patching Holes In A Drywall
Here is the list of required equipments to patch holes in a drywall.
- Sanding block/sponge
- Drywall tape
- Compound/tray
- Paddle mixer
- Powdered joint compound/Plaster of Paris (optional)
- Joint compound/spackle
- Putty knife
- Utility knife
- Screw gun
- Hammer
Procedure To Patch Holes In A Drywall
If you have a hole in your wall from a nail, screw, or anchor, don’t worry, you can fix it yourself! Here’s how:
- Preparation
Remove any flaked paint or loose drywall paper with a utility knife. Then, scrape over the hole with a putty knife to make it smooth.
- Mix the Compound
Mix up some drywall compound in a bucket with a paddle mixer or a putty knife. If you want it to dry faster, add some powdered joint compound or Plaster of Paris, but be careful not to add too much.
- Apply the First Coat
Using a putty knife, spread the compound over the hole, pushing it in gently. Scrape away any excess with the knife at a shallow angle, and then again at a sharper angle to remove any bubbles. Let it dry for at least an hour.
- Sand the Area
Use a sanding block to smooth out any bumps or ridges in the dried compound. This doesn’t need to be perfect, just enough to prepare for the next coat.
- Apply the Second Coat
Repeat Step 3 with a second coat of compound. Let it dry for an hour.
- Sand the Patched Area Again
Use the sanding block again to smooth out any bumps in the second coat. If the hole is still visible, apply a third coat and sand it again.
And that’s it! With a little patience and practice, you can fix small holes in your drywall like a pro.