Porcelain tile is a type of ceramics tile but they are stronger, harder, and water-resistant. These types of tiles are more durable compared to traditional ceramics tiles and glazed ceramic tiles.
These types of tiles are manufactured by using clay with finer particles at a higher temperature.
Porcelain tile is water and stain-resistance. The maintenance cost of these types of tiles are is very low.
We often see ceramics tiles can break easily, but porcelain tiles have higher strength which makes them more durable.
The cost of porcelain tile is high. Normally they are not used for washroom floor and wall tiles.
Table of Contents
Installation of Porcelain tile :
Porcelain tiles are very hard. It required skilled workmanship to cut in precise size and shape. Special saws are needed to cut porcelain tiles. An experienced contractor can be hired for a large amount of work.
Uses Porcelain tile:
Porcelain is a lot harder than normal ceramic tiles and is typically chosen, regardless of its more exorbitant cost, for its hard-wearing nature. Porcelain can be utilized in both wet and dry regions like restrooms, showers, and kitchens.
Advantages of Porcelain Tiles
- Porcelain tile is very strong and can bear a high load.
- Fully vitrified porcelain is stain-resistant.
- These types of tiles have a very low absorption rate which makes them 100% frostproof.
- They are resistant to moss, mould and algae growth so will be easy to keep clean and clear.
- They provide enough friction agains slip.
- It is very difficult to scracth upper surface of the tile.
- Load bearing capacity is very high.
Closing Thought:
As we know porcelain is a type of ceramic tile but it is more expensive. So if you have a low budget then go for the traditional ceramics tiles.
If you are looking for more aesthetics and durability then you should choose porcelain tiles.